Ortur Laser Master 3

Upgrade the optical power to 20W, engraving 380+ colors on stainless steel.

  • Power System: 24V 4Amp
  • Engrave Area: 400mm x 400mm
  • Construction Material: 70% Aluminiun, 15% Stainless Steel, 5% plastic, 5% Brass, 5% Others
  • Maximum Engraving Speed: 20,000mm/min
  • Features:
      – 2.4G Wifi, USB, SD Card, FTP and WebUi control
      – Emergency Stop
      – Safety Key Interlock
      – Exposure Duration and Limitation
      – Active G-shock and Gyroscopic Sensor
  • LU2-10A Laser Module
    Optical Power Output: >9500mW
    WaveLenght: 445nm
    Focal Lenght: 50mm
    Dot size: 0.05×0.10mm
    Modulation Mode: TTL
    Weight: 235g
  • LU3-20A Laser Module
    Optical Power Output: >18,000mW
    WaveLenght: 445nm
    Focal Lenght: 56.5mm
    Dot size: 0.08*0.08mm
    Modulation Mode: PWM
    Weight: 555g

Get Started Quickly

OLM3 installation tutorial(1)
OLM3 installation tutorial(2)
OLM3 installation folding feet and usage tutorial
OLM3 extended version assembly video(1)
OLM3 extended version assembly video(2)
OLM3 boot operation HD
OLM3 gyroscope detection
OLM3 emergency stop button

Use Tutorial

How to connect OLM3 with Web UI
How to connect OLM3, Lightburn and set engraving parameters
Use the APP network distribution function to connect to OLM3
APP connection OLM3 engraving tutorial
LaserGRBL and LightBurn operation tutorial screen recording and engraving
OLM3 smoke purifier, air pump, fire box and cutting platform are used together
Web UI connection LaserMaster3 engraving tutorial

Get Started Quickly

OLM3 connects YRR2.0 to use LightBurn to engrave stainless steel cups
OLM3 connected to YRR 3.0 using LightBurn to engrave cans
OLM3 engraving tiles
OLM3 cutting 30MM acrylic plate
OLM3 cutting minimalist clock
OLM3 cutting and splicing violin