Laser Master 3 - LE
Power System: 24V 4Amp
Engrave Area: 400mm x 400m
Construction Material: 70% Aluminiun, 15% Stainless Steel, 5% plastic, 5% Brass, 5% Others
Maximum Engraving Speed: 15000mm/min
Features:
-2.4G Wifi, USB, SD Card, FTP and WebUi control
-Exposure Duration and Limitation
-Active G-shock and Gyroscopic Sensor
LU2-10 10W module:
Optical Power Output: >9500mW
WaveLenght: 445nm
Focal Lenght: 50mm
Dot size: 0.05×0.10mm
Modulation mode: TTL
Weight: 235g
| Motherboard | OLM-ESP-PRO-V2.4 |
| Firmware | OLF-V2.0 Firmware |
| Safety Features | 1. Active Position Protection |
| 2. Exposure Duration Detection and Limitation | |
| 3. Laser Beam Safety Guard 4. Wifi, FTP and SD Card reader | |
| Frame Materials | 70% Aluminiun, 15% Stainless Steel, 5% plastic, 5% Brass, 5% Others |
| Motors | NEMA 17 Stepper Motors |
| Mechanical Precision | Y:12.5um，X:12.5um |
| Pixel Accuracy | Adjustable – (Default: 300 DP; roughly0.81um Pixel Accuracy) |
| Engraving Area | 400mm*400mm |
| Available Laser Modules | LU2-10 – Optical Power: >9500-10500mw |
| Wave Length | 445±5nm |
| Focus | Fixed Focus |
| Default Focal Length | 50mm (from the heat sink to the object) |
| Control Mode | PWM |
| Power Rate | S0-S1,000 |
| Engraving Speed | 0-15,000MM/Min |
| Baud Rate | 115200 – 921600 (Default: 115200) |
| Computer OS | Win XP, Win 7, Win 8, Win 10 (LaserGRBL) |
| Mac and Linux (LightBurn) | |
| Control Softwares | LaserGRBL (free), LightBurn (Paid Software) |
| Input Format | JPG, JPEG, PNG, BMP, SVG, etc. |
| Available Materials of Engraving | Wood Board, Paperboard, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc. |
| Available Materials of Cutting | Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc. |
| Input Voltage | 100-240~50/60Hz |
| Power Adapter Output | 24V/4A |
| Operating Temp | -5℃ – 50℃ |
List of compatible software with Ortur Laser Master 3
- LaserGrbl: Download Page (PC – Free. Please user 4.9.x or higher)
- LightBurn: Download Page (PC/MAC – 30 Day Free Trial)
Ortur Laser Master 3 LE and Drivers
Ortur Laser Master 3 LE uses standard Serial com port driverless communication.
This means in most operating systems, Windows 10, MacOs, Linux, theres no need to install any drivers.
However in some circunstances, specially on Operating systems already End of Life (EoL) the drivers are not installed via Windows Updates. This is particularly true on Windows XP, Windows 7 and Some versions of WIndows 8
In this circunstances an Error will apear in the Device manager as below
In this cases some special instructions are required to Force install the USB Serial CDC Drivers.
Please follow the steps below Step by Step:
Ortur Laser Master 3 LE Firmware
Ortur Firmware is constantly being improved.
For the latest version please visit the firmware repository webpage:
Firmware Repository
For support inquiries please use Ortur’s Ticketing system at